panbrake hydraulic 3070x6.5mm

EPIC Hydraulic Straight Blade Folders

EPIC Machinery’s hydraulic ram mounting systems have been designed to have minimal deflection under recommended loads. The full tonnage delivered by the clamping rams is transferred to the head through the trunnion bearings which are mounted to the machines’ side frames providing support even at the centre of the machine head; minimising any side movement. When bending at full capacity this achieves a smaller radius and a nice straight bend/fold.

Category:

Description

Standard features:

  • High tensile spring steel clamping blade
  • One-piece blade spreads the load equally
  • High tensile apron blade
  • Head clamping through trunnion bearings mounted on the centre line of the side frames to minimise head deflection
  • Low voltage 24 volt electrics (Australian-made)
  • Machined front support
  • Bend angle up to 130 degrees, allowing for flattening of light material
  • European hydraulic systems

Optional Features

  • High tensile spring steel insert in the top of the bed
  • Ball screw back gauge works in conjunction with10-station controller converting the machine into a 2–axis pan brake
  • Guarding to suit specific regulations or categories (laser sensors)

Machine Lengths, Bending Capacities [Model No]

  • 1250mm bending length x 2mm, 4mm, 6.5mm mild steel capacity – [Model No. 1250HF2, 1250HF4, 1250HF6.5]
  • 1860mm bending length x (2mm, 4mm, 6.5mm mild steel capacity -[Model No. 1860HF2, 1860HF4, 1860HF6.5]
  • 2500mm bending length x 2mm, 4mm, 6.5mm mild steel capacity – [Model No. 2500HF2, 2500HF4, 2500HF6.5]
  • 3070mm bending length x 2mm, 4mm, 6.5mm mild steel capacity – [Model No. 3070HF2, 3070HF4, 3070HF6.5]
  • 3710mm bending length x 1.6mm, 3mm, 5mm mild steel capacity – [Model No. 3710HF1.6, 3710HF3, 3710HF5]
  • 4020mm bending length x 1.6mm, 3mm, 5mm mild steel capacity – [Model No. 4020HF1.6, 4020HF3, 4020HF5]

Related products